The battery is fully charged in only 1.5 hours by connecting the device to the computer via the USB cable.

Connect the recorder to a PC, via the USB cable provided in the box and access the folder RECORD in the partition of the device.

In the folder RECORD create a TEXT document with the name time.txt.

a. for Windows PCs - you can right-click in the folder RECORD and select NEW -≥Text Document. Or go to Start menu and open Notepad, create the text file and then save it to the folder RECORD.

b. for Mac - you can either install Notepad or go to Mac editor and select the plaintext format for your document in order to save a .txt file.

The first line should reflect current date and time with the format: yyyymmddhhmmss, as follows:yyyy – four digits format for year (ex. 2020), mm - is 2 digits month (ex. for May is 05),dd - 2 digits day (ex. if today is in 3rd - you must put 03). hh - means 2 digit hour format(24 hours format, not AM or PM)- ex. for 5 PM you must use the digits 17, for 6 AM is06, etc. ; mm - is 2 digit format for minutes and ss - is 2 digit format for seconds.

If today would be the 1st of October 2020, at If today would be the 1st of October 2020, at 11:30 AM, here is what you should write in the time.txt file: 20201001113050 (no spaces in front or after these digits).

The second line reflects the recording mode set up for your device. To set the device to voice-activated recording please use 1. To set the device to continuous recording mode, please use 0.

To resume: Voice activated recording mode = 1; Continuous recording mode = 0

The third line is to set the LED light indicator mode. Setting the mode to 1 means that the blue LED indicator will keep flashing during recording period to signal the device is working.

Setting the value to 0 will mean that the LED indicator will not flash at all during recording time.

Push the RECORDING “ON/OFF” button to “ON” position and the device will start recording once the red indicator light turns green. NOTE: Please note that the device will start in the last Operating Mode that the voice recorder worked before turning OFF.

The device can be used without any password on it (the default setting comes with “0000” password which means that no password is required when the device is used).

To set your password go in the main menu, choose setting mode, then select Password. In the password menu, you’ll find the 0000 default password.To change one of the password digits, press M to select the digit you need to adjust and then use arrows to scroll to the desired value. When done, press power button to save and exit.

Note: if you set a password on the device, every time you turn it on it will ask for it. Activate the function only if you need it.

When the device stops working, please use a pin or needle to press the reset hole on the back of the device, then the device would be restored.

To reset the device to factory default settings, please press for 15 seconds the UP arrow from the left side of the device. When the reset is completed, on the device’s display will appear the message“Restored!”

Please connect the recorder to the PC or any USB power source to charge it. When the device is charging, the blue light indicator keeps flashing. The 4 blue led lights will flash intermittently during charging, indicating the actual level of the battery. The recorder is fully charged when the lights stop flashing and remains lit.

• using a 5V/2A output power (see the label of your charger) – 3 hours

• using a 5V/1A output power (see the label of your charger) – 6 hours

The PoweREC battery can last up to 380 hours on a full battery cycle.

NOTE! The recording function is available even when used simultaneously as a power bank to charge other devices. However, due to power consumption, the battery will drain faster than the 380 hours mentioned.If the blue indicator light flashes during recording, it means the power is not enough. The power indicator light will automatically go out after 40 seconds. To shut it sooner, short press the power button twice. When battery level is low you can connect the recorder to power source as it will record and charge simultaneously.

Please connect the recorder to the PC and create anew text file into the folder RECORD, with the name of the file: time . It’svery important that the time.txt file to be in the folder RECORDER, otherwise the device will not set the time and it will use the original date and time of the manufacture date. So in the folder RECORD you must see now a folder VOICE (where the audio recorded files it will be saved ) and the new text file that you have created before named: time , with the extension of the file .txt . Open time.txt file with any text editor installed in your system and put the current time and date with the following format: yyyymmddhhmmss , where yyyy - is four digit year (ex. 2017), mm - is 2digit month (ex. for November is 11), dd - 2 digit day (ex. if today is in 3rd -you must put 03). hh - means 2 digit hour in the 24 hours format ( not a.m.or p.m.) - ex. for the time clock 5 p.m. you must use the digit 17, for 6 a.m.is 06, etc; mm - is 2 digit format for minutes and ss - is 2 digit format for seconds.

Let’s take for example of how to create the format of date and time:If today is 22 of April 20199, the time is 05:24 p.m. you must put in the time.txt file the following digits: 20190222172400 (no spaces in front or after these digits). After you insert these digits in the time.txt file save the file, disconnect the recorder from the computer and when you will turn it ON the device will automatically create audio files named after the time and date when you start the device.

Let’s take for example of how to create the format of date and time:If today is 22 of April 2020, the time is 05:24 p.m. you must put in the time.txt file the following digits: 20200222172400 (no spaces in front or after these digits). After you insert these digits in the time.txt file save the file, disconnect the recorder from the computer and when you will turn it ON the device will automatically create audio files named after the time and date when you start the device.

Let’s take for example of how to create the format of date and time:If today is 22 of April 2020, the time is 05:24 p.m. you must put in the time.txt file the following digits: 20200222172400 (no spaces in front or after these digits). After you insert these digits in the time.txt file save the file, disconnect the recorder from the computer and when you will turn it ON the device will automatically create audio files named after the time and date when you start the device.